Overall

Piezo resistief opnemers

Het piëzo-resistieve effect is het verschijnsel waarbij kristallen van bepaalde materialen, onder invloed van mechanische druk, een elektrische weerstand vergroten. Dit effect kan derhalve gebruikt worden om druk om te zetten naar een elektrisch signaal. Hiermee kunnen dus druktransducenten of complete druksensoren worden geproduceerd.

Meetbereiken van 0…0,05 bar tot 0…1000 bar. Uitvoeringen in RVS316L, Titanium, kermaisch en PVDF voor agressieve media. Analoge uitgangen: mV, 0-1/5/10V, 4-20 mA, digitale (RS232 en 485), CAN-bus, SDI-12 en schakeluitgangen zijn mogelijk. Nauwkeurigheden tot 0,05% FS. Beschermingsgraden tot IP68 (voor gebruik onderwater). Alle Piezo Resistief uitvoeringen ook verkrijgbaar in IS-safe uitvoering (Eex ia en ATEX). GL-keur leverbaar. Dataloggers voor druk-, nivo-, temperatuur en geleidbaarheidsmetingen.

  1. Piëzo – Resistief Klein
  2. Piëzo – Resistief
  3. Piëzo – Resistief Niveau
  4. Piëzo Resistief Eex & Atex
  5. Piëzo Resistief Dataloggersystemen
Overzichtsfolder STS Downloads
Overzicht druksensoren Download Overall

ANCHOR

1. Piëzo – Resistief Klein

Type Piezo Resistief Eigenschappen Downloads
ATM/MINI
  • Pressure range: 1 Bar … 100 Bar
  • Accuracy: ≤ ± 0.2 / 0.1 % FS
  • Operating temperature: -40 … 125°C
  • Process temperature: -40 … 125°C
  • Output signal: 0.5 … 4.5 VDC / 4 … 20 mA
  • Total Error Band: ≤ ± 0.5 %FS
  • Materials: Stainless steel.
 Download

ANCHOR

2. Piëzo – Resistief

Type Piezo Resistief Eigenschappen Downloads
TD
Piezo_resistief_01_TD
  • Pressure range: 100 mBar…1000 Bar.
  • Accuracy: ≤ ± 0.50 / 0.25 % FS.
  • Output signal: mV.
  • Materials: Stainless steel, Titanium, Hastelloy.
 Download
TD-Polynom
Piezo_resistief_02_TD-polynom
  • Pressure range: 2 Bar…100 Bar.
  • Total Error: ≤ ± 0.2 % rdg (30…100 %FS).
  • Compensation: -40…60 °C.
  • Operating temperature: -40…150 °C.
  • Output signal: mV.
  • Materials: Stainless steel.
 Download
TM
AE Sensors TM
  • Pressure range: 100 mBar…1000 Bar.
  • Accuracy: ≤ ± 0.50 / 0.25 % FS.
  • Operating temperature: -40…125 °C.
  • Process temperature: -40…150 °C.
  • Output signal: mV.
  • Materials: Stainless steel, Titanium.
 Download
ATM.ECO
AE Sensors ATM.ECO
  • Pressure range: 100 mBar…1000 Bar.
  • Accuracy: ≤ ± 0.25 % FS.
  • Operating temperature: -40…125 °C.
  • Process temperature: -40…150 °C.
  • Output signal: 0…5 / 0…10 V DC, 4…20 mA.
  • Total Error Band: ≤ ± 0.70 %FS (0…70 °C).
  • Materials: Stainless steel, Titanium.
 Download
ATM
AE Sensors ATM
  • Pressure range: 100 mBar…1000 Bar.
  • Accuracy: ≤ ± 0.50 / 0.25 / 0.10 % FS.
  • Operating temperature: -25…85 °C.
  • Process temperature: -40…150 °C.
  • Output signal: 0…5 / 0…10 V DC, 0…20 / 4…20 mA.
  • Materials: Stainless steel, Titanium.
 Download
ATM.1st
AE Sensors ATM.1ST
  • Pressure range: 100 mBar…1000 Bar.
  • Accuracy: ≤ ± 0.25 / 0.10 % FS / 0.05 % FS.
  • Operating temperature: -40…125 °C.
  • Process temperature: -40…150 °C.
  • Output signal: 0…5 / 0…10 V DC, 4…20 mA.
  • Total Error Band: ≤ ± 0.30 %FS (0…70 °C).
  • Materials: Stainless steel, Titanium.
 Download
ATM/F
ATM.F
  • Pressure range: 100 mBar…25 Bar.
  • Accuracy: ≤ ± 0.50 / 0.25 / 0.10 % FS.
  • Operating temperature: -25…85 °C.
  • Process temperature: -25…100 °C.
  • Output signal: 0…5 / 0…10 V DC, 0…20 / 4…20 mA.
  • Materials: Stainless steel.
 Download
ATM/GR
AE Sensors ATM.GR
  • Pressure range: 100 mBar…1000 Bar.
  • Two potential free switches (48 V, 2 A, 60W).
  • Operating temperature: -25…85 °C.
  • Process temperature: -40…150 °C.
  • Materials: Stainless steel, Titanium.
  • Feature: Output signal 0…20 mA / 4…20 mA.
 Download
ATM/K
AE Sensors ATM/K
  • Pressure range: 100 mBar…25 Bar.
  • Accuracy: ≤ ± 0.25 % FS.
  • Operating temperature: -25…85 °C.
  • Process temperature: -40…125 °C.
  • Output signal: 4…20 mA.
  • Materials: Stainless steel.
 Download
PTM
AE Sensors PTM
  • Pressure range: 100 mBar…1000 Bar.
  • Adjustable: 1:4 of the nominal range within -5% to +105%.
  • Accuracy: ≤ ± 0.25 / 0.10 % FS.
  • Operating temperature: -25…85 °C.
  • Process temperature: -40…150 °C.
  • Output signal: 4…20 mA.
  • Materials: Stainless steel, Titanium.
  • Feature: Recalibration with software possible.
 Download
PTM/RS485
AE Sensors PTM/RS485
  • Pressure range: 100 mBar…1000 Bar.
  • Adjustable 1:4 of the nominal range within -5% to +105% (analog output).
  • Accuracy: ≤ ± 0.25 / 0.10 % FS.
  • Temperature range: -25…85 °C.
  • Operating temperature: -25…85 °C.
  • Process temperature: -40…150 °C.
  • 2 Output signals (p & T): 4…20 mA.
  • Interface: RS485 (Modbus RTU).
  • Materials: Stainless steel, Titanium.
  • Feature: Recalibration with software possible.
 Download
ATM/T
AE Sensors ATM/T
  • Pressure range: 100 mBar…25 Bar.
  • Accuracy: ≤ ± 0.5 / 0.25 % / 0.1 % FS.
  • Temperature output Accuracy: ­≤±0,5°C..
  • Operating temperature: -40…125 °C.
  • Process temperature: -40…150 °C.
  • Output signal: 4…20 mA.
  • Total Error Band: ≤ ± 0.70 %FS (0…70 °C).
  • Materials: Stainless steel, Titanium.
 Download
ATM/1st/T
AE Sensors ATM.1ST/T
  • Pressure range: 100 mBar…25 Bar.
  • Accuracy: ≤ ± 0.25 / 0.10 % FS / 0.05 % FS.
  • Temperature output Accuracy: ­≤±0,5°C..
  • Operating temperature: -40…125 °C.
  • Process temperature: -40…150 °C.
  • Output signal: 4…20 mA.
  • Total Error Band: ≤ ± 0.70 %FS (0…70 °C).
  • Materials: Stainless steel, Titanium.
 Download
DTM.OCS.S-Modbus
AE Sensors DTM.OCS
  • Pressure range: 200 mBar…100 Bar.
  • Accuracy: ≤±0.15 / 0.05 % / 0.03 % FS.
  • Operating temperature: -40…85 °C.
  • Process temperature: -40…85 °C.
  • Output signal: RS485.
  • Materials: Stainless steel, Titanium.
 Download

ANCHOR

3. Piëzo – Resistief Niveau

Type Piezo Resistief Eigenschappen Downloads
MTN/10
AE Sensors MTM/N
  • Pressure range: 10…100 mH2O
  • Accuracy: ≤ ± 0.50 / 0.25
  • Operating temperature: -5…50 °C
  • Process temperature: -5…50 °C
  • Output signal: mV
  • Materials: Stainless steel, Titanium
  • Feature: Level transmitter with 10 mm diameter,
  • Versions with ATM/N or DL/N 70 possible.
 Download
ATM/N 19
  • Pressure range: 1…250 mH2O.
  • Accuracy: ≤ ± 0.2 / 0.10 / 0.05 % FS.
  • Operating temperature: -5…80 °C.
  • Process temperature: -5…80 °C.
  • Output signal: 0…5 / 0…10 V DC, 4…20 mA.
  • Materials: Stainless steel.
  • Feature: 19 mm diameter.
 Download
TM/N
AE Sensors TM/N
  • Pressure range: 1…250 mH2O.
  • Accuracy: ≤ ± 0.50 / 0.25 % FS.
  • Operating temperature: -5…80 °C.
  • Process temperature: -5…80 °C.
  • Output signal: mV.
  • Materials: Stainless steel, Titanium.
 Download
ATM.ECO/N
AE Sensors ATM.ECO/N
  • Pressure range: 0,1…250 mH2O.
  • Accuracy: ≤ ± 0.25 % FS.
  • Total Error Band: ≤ ± 0.70 %FS (-5…50 °C).
  • Operating temperature: -5…80 °C.
  • Process temperature: -5…80 °C.
  • Output signal: 0…5 / 0…10 V DC, 4…20 mA.
  • Materials: Stainless steel, Titanium.
 Download
ATM/N
AE Sensors ATM/N
  • Pressure range: 0,05…250 mH2O.
  • Accuracy: ≤ ± 0.50 / 0.25 / 0.10 % FS.
  • Operating temperature: -5…80 °C.
  • Process temperature: -5…80 °C.
  • Output signal: 0…5 / 0…10 V DC, 0…20 / 4…20 mA.
  • Materials: Stainless steel, Titanium.
  • Feature: Optional surge (lightning) protection.
 Download
ATM.1ST/N
AE Sensors ATM.1ST/N
  • Pressure range: 0,05…250 mH2O.
  • Accuracy: ≤ ± 0.25 / 0.10 % FS / 0.05 % FS.
  • Total Error Band: ≤ ± 0.30 %FS (-5…50 °C).
  • Operating temperature: -5…80 °C.
  • Process temperature: -5…80 °C.
  • Output signal: 0…5 / 0…10 V DC, 4…20 mA.
  • Materials: Stainless steel, Titanium.
 Download
ATM.1ST/N/T
AE Sensors ATM.1ST/N/T
  • Pressure range: 1…250 mH2O.
  • Accuracy: ≤ ± 0.25 / 0.10 % FS / 0.05 % FS.
  • Temperature range: -5…80 °C.
  • Operating temperature: -5…80 °C.
  • Process temperature: -5…80 °C.
  • Output signal: 4…20 mA.
  • Materials: Stainless steel, Titanium.
 Download
ATM/N/T
AE Sensors ATM/N/T
  • Pressure range: 1…250 mH2O.
  • Accuracy: ≤ ± 0.50 / 0.25 / 0.10 % FS.
  • Temperature range: -5…80 °C.
  • Operating temperature: -5…80 °C.
  • Process temperature: -5…80 °C.
  • 2 Output signals (p & T): 0…10 V DC, 0…20 / 4…20 mA.
  • Materials: Stainless steel, Titanium.
 Download
ATM/K/N
AE Sensors ATM/K/N
  • Pressure  range: 1…200 mH2O.
  • Ceramic sensorelement.
  • Accuracy: ≤ ± 0.25 % FS.
  • Operating temperature: -5…50 °C.
  • Process temperature: -5…50 °C.
  • Output signal: 4…20 mA.
  • Materials: Stainless steel.
  • Feature: Optional surge (lightning) protection.
 Download
ATM/NC
AE Sensors ATM/NC
  • Pressure range: 1…250 mH2O.
  • Accuracy: ≤ ± 2.0 % FS.
  • Operating temperature: -5…80 °C.
  • Process temperature: -5…80 °C.
  • Output signal: 0…5 / 0…10 V DC, 0…20 / 4…20 mA.
  • Materials: PVDF.
  • Feature: Optional surge (lightning) protection.
 Download
PTM/N
AE Sensors PTM/N
  • Pressure range: 1…250 mH2O.
  • Accuracy: ≤ ± 0.25 / 0.10 % FS.
  • Adjustable 1:4 of the nominal range within -5% to +105%.
  • Operating temperature: -5…80 °C.
  • Process temperature: -5…80 °C.
  • Output signal: 4…20 mA.
  • Materials: Stainless steel, Titanium.
  • Feature: Recalibration with software possible.
 Download
PTM/N/RS485
AE Sensors PTM/N/RS485
  • Pressure range: 1…250 mH2O.
  • Adjustable 1:4 of the nominal range within -5% to +105% (analog output).
  • Accuracy: ≤ ± 0.25 / 0.10 % FS.
  • Temperature range: -25…85 °C.
  • Operating temperature: -5…80 °C.
  • Process temperature: -5…80 °C.
  • 2 Output signals (p & T): 4…20 mA.
  • Interface: RS485 (Modbus RTU).
  • Materials: Stainless steel, Titanium.
  • Feature: Recalibration with software possible, optional surge (lightning) protection.
 Download
PTM/N/SDI12
AE Sensors PTM/N/SDI-12
  • Pressure range: 5…250 mH2O.
  • Accuracy: ≤ ± 0.25 / 0.10 % FS.
  • Temperature range: -25…85 °C.
  • Operating temperature: -5…50 °C.
  • Process temperature: -5…50 °C.
  • Interface: SDI-12 (V1.3).
  • Materials: Stainless steel, Titanium.
  • Feature: Recalibration possible, Adjustable units.
 Download
DTM.OCS.S/N-Modbus

AE Sensors DTM.OCS/S/N
  • Ressure range: 1…250 mH2O.
  • Accuracy: = ± 0.15 /0.05 / 0.03% FS.
  • Operating temperature: -5…80 °C.
  • Process temperature: -5…80 °C.
  • Interface: RS485.
    Materials: Stainless steel, Titanium.
  • Feature: High Precision, Adjustment of zero and span setting through Modbus commands.
 Download

ANCHOR

4. Piëzo Resistief Eex & Atex

Type Piezo Resistief Eigenschappen Downloads
PTM/MT/Ex
AE Sensors PTM/MT/Ex           
  • Pressure measuring range: 0…0,4 Bar /
    0…1 Bar / 0…2,5 Bar / 0…4 Bar / 0…6 Bar.
  • Accuracy: = ± 0.25 % FS.
  • Operating temperature: -20…100 °C.
  • Process temperature: -20…100 °C.
  • Output signal: 4…20 mA.
  • Materials: Titanium.
  • Hysteresis and repeatability better than 0.01 %.
  • Certificate: ATEX, IECEx and DNV-GL.
 Download
TM/Ex
AE Sensors TM/Ex
  • Pressure range: 100 mBar…1000 Bar.
  • Accuracy: ≤ ± 0.50 / 0.25 % FS.
  • Operating temperature: -40…125 °C.
  • Process temperature: -40…150 °C.
  • Output signal: mV.
  • Materials: Stainless steel, Titanium.
  • Certificate: ATEX & EAC.
 Download
ATM.ECO/Ex
AE Sensors ATM.ECO/Ex
  • Pressure range: 100 mBar…1000 Bar.
  • Accuracy: ≤ ± 0.25 % FS.
  • Operating temperature: -40…125 °C.
  • Process temperature: -40…150 °C.
  • Output signal: 4…20 mA.
  • Total Error Band: ≤ ± 0.70 %FS (0…70 °C).
  • Materials: Stainless steel, Titanium.
  • Certificates: ATEX, IECEx, EAC, GL/DNV, ABS, Lloyds.
 Download
ATM/Ex
AE Sensors ATM/Ex
  • Pressure range: 100 mBar…1000 Bar.
  • Accuracy: ≤ ± 0.50 / 0.25 / 0.10 % FS.
  • Operating temperature: -25…85 °C.
  • Process temperature: -40…150 °C.
  • Output signal: 4…20 mA.
  • Materials: Stainless steel, Titanium.
  • Certificate: ATEX & EAC.
 Download
ATM.1ST/Ex
AE Sensors ATM.1ST/Ex
  • Pressure range: 100 mBar…1000 Bar.
  • Accuracy: ≤ ± 0.25 / 0.10 % FS / 0.05 % FS.
  • Operating temperature: -40…125 °C.
  • Process temperature: -40…150 °C.
  • Output signal: 4…20 mA.
  • Total Error Band: ≤ ± 0.30 %FS (0…70 °C).
  • Materials: Stainless steel, Titanium.
  • Certificates: ATEX, IECEx, EAC, GL/DNV, ABS, Lloyds.
 Download
ATM/F/Ex
AE Sensors ATM/F/Ex
  • Pressure range: 100 mBar…25 Bar
  • Accuracy: ≤ ± 0.50 / 0.25 / 0.10 % FS
  • Operating temperature: -25…85 °C
  • Process temperature: -25…100 °C
  • Output signal: 4…20 mA
  • Materials: Stainless steel.
  • Certificate: ATEX & EAC.
 Download
PTM/Ex
AE Sensors PTM/Ex
  • Pressure range: 100 mBar…1000 Bar.
  • Adjustable 1:4 of the nominal range within -5% to +105%.
  • Accuracy: ≤ ± 0.25 / 0.10 % FS.
  • Operating temperature: -25…85 °C.
  • Process temperature: -40…150 °C.
  • Output signal: 4…20 mA.
  • Materials: Stainless steel, Titanium.
  • Feature: Recalibration with software possible.
  • Certificate: ATEX & EAC.
 Download
TM/N/Ex
AE Sensors TM/N/Ex
  • Pressure range: 1…250 mH2O
  • Accuracy: ≤ ± 0.50 / 0.25 % FS
  • Operating temperature: -5…80 °C
  • Process temperature: -5…80 °C
  • Output signal: mV
  • Materials: Stainless steel, Titanium.
  • Certificate: ATEX.
 Download
ATM.ECO/N/Ex
AE Sensors ATM.ECO/N/Ex
  • Pressure range: 1…250 mH2O.
  • Accuracy: ≤ ± 0.25 % FS.
  • Total Error Band: ≤ ± 0.70 %FS (-5…50 °C).
  • Operating temperature: -5…80 °C.
  • Process temperature: -5…80 °C.
  • Output signal: 4…20 mA.
  • Materials: Stainless steel, Titanium.
  • Certificate: ATEX & IECEx.
 Download
ATM/N/Ex
AE Sensors ATM/N/Ex
  • Pressure range: 1…250 mH2O.
  • Accuracy: ≤ ± 0.50 / 0.25 / 0.10 % FS.
  • Operating temperature: -5…80 °C.
  • Process temperature: -5…80 °C.
  • Output signal: 4…20 mA.
  • Materials: Stainless steel, Titanium.
  • Feature: Optional surge (lightning) protection.
  • Certificate: ATEX.
 Download
ATM.1ST/N/Ex
AE Sensors ATM.1ST/N/Ex
  • Pressure range: 1…250 mH2O.
  • Accuracy: ≤ ± 0.25 / 0.10 % FS / 0.05 % FS.
  • Temperature output Accuracy: ­≤±0,5°C.
  • Operating temperature: -40…125 °C.
  • Process temperature: -40…150 °C.
  • Output signal: 4…20 mA.
  • Total Error Band: ≤ ± 0.70 %FS (0…70 °C).
  • Materials: Stainless steel, Titanium.
  • Certificates: ATEX, IECEx, EAC, GL/DNV, ABS, Lloyds.
 Download
ATM/NC/Ex
AE Sensors ATM/NC/Ex
  • Pressure range: 1…250 mH2O.
  • Accuracy: ≤ ± 2.0 % FS.
  • Operating temperature: -5…80 °C.
  • Process temperature: -5…80 °C.
  • Output signal: 4…20 mA.
  • Materials: PVDF.
  • Feature: Optional surge (lightning) protection.
  • Certificate: ATEX
 Download
PTM/N/Ex
AE Sensors PTM/N/Ex
  • Pressure range: 1…250 mH2O.
  • Accuracy: ≤ ± 0.25 / 0.10 % FS.
  • Adjustable 1:4 of the nominal range within -5% to +105%.
  • Operating temperature: -5…80 °C.
  • Process temperature: -5…80 °C.
  • Output signal: 4…20 mA.
  • Materials: Stainless steel, Titanium.
  • Feature: Recalibration with software possible.
  • Certificate: ATEX.
 Download

ANCHOR

5. Piëzo Resistief Dataloggersystemen

Type Piezo Resistief Eigenschappen Downloads
DL.WMS watermanager
AE Sensors DL.MWS watermanager
  • Pressure measuring range: 0…5 /0…250 mH2O.
  • Accuracy: = ± 0.210 % FS.
  • Temperature measuring range: -5…80°C.
  • Operating temperature: -5 … 80 / -5 … 50 °C (logger).
  • Process temperature: -5…80°C.
  • Radio interface: 433 MHz.
  • Data transfer: GSM/GPRS.
  • Frequency band: 850/900, 1800/1900 MHz (Quadband).
  • Materials level transmitter: Stainless steel, Titanium.
  • Materials logger: Plastic, Stainless steel.
  • Feature: Battery operation, 250’000 Measurement values, Measurement interval 2s…12h, Online programmable, Housekeeping data (temperature, humidity, battery voltage).
 Download
DL.WMS.mini
AE Sensors DL.WMS.mini
  • Pressure measuring range: 0…10/20/90 mH2O.
  • Accuracy: = ± 0.15 % FS.
  • Temperature measuring range: -5…80°C.
  • Operating temperature: -5 … 80 / -5 … 50 °C (logger).
  • Process temperature: -5…80°C.
  • Radio interface: 433 MHz.
  • Data transfer: GSM/GPRS.
  • Frequency band: 850/900, 1800/1900 MHz (Quadband).
  • Materials level transmitter: Stainless steel, Titanium.
  • Materials logger: Plastic, Stainless steel.
  • Feature: Battery operation, 250’000 Measurement values, Measurement interval 2s…12h, Online programmable, Housekeeping data (temperature, humidity, battery voltage).
 Download
DL.OCS/N/RS485
AE Sensors DL.OCS/N/RS485
  • Pressure measuring range: 0…250 mH2O.
  • Accuracy: = ± 0.15 / 0.05 / 0,03 % FS.
  • Temperature measuring range: -5…50°C.
  • Conductivity measuring range: from
    0.. 200 µS/cm up to 0…200 mS/cm.
  • Operating temperature: -5…80°C.
  • Process temperature: -5…80°C.
  • Interface: via USB interface.
  • Materials: Stainless steel, Titanium.
  • Feature: Battery operation, Measurement interval 1s…24h, 1.500’000 Measurement values.
 Download